SIGONNA Eyeglass Nose Pads — Fit Guide & FAQ

This guide covers fit and application for SIGONNA Eyeglass Nose Pads (adhesive silicone bridge pads, 6 pairs per pack). Select Color and Thickness on the product page.

Which thickness should I choose?

  • 0.5 mm — low profile, minimal lift; good when frames sit slightly high or you want a discreet pad.
  • 1 mm — more bridge height and grip; good when glasses slide down or you need extra support.

Black vs Transparent

Black pads blend with dark frames. Transparent pads are less visible on light or rimless styles.

Will these fit my glasses?

SIGONNA nose pads are adhesive silicone pads designed for frames without existing nose pads — a bare plastic or metal bridge with a flat or semi-flat surface.

They will not stay on frames that already have built-in silicone or rubber nose pads — the adhesive can't bond to that material, and pads will lift within days (see photo: "Don't fit"). Many sport and performance sunglasses, come with these built-in pads already and don't need this product.

Not sure which type your frames have? Look at the nose bridge up close: if you see two separate soft pads already attached, skip this product — your frames already have grip built in.

How to apply

  1. Clean the nose bridge area with alcohol; let it dry completely.
  2. Peel the backing from one pad.
  3. Center the pad on the frame's nose contact point — avoid touching the adhesive.
  4. Press firmly for 30 seconds.
  5. Wait 24 hours before heavy use for best bond.

FAQ

Will these work on my sunglasses?
Some models come with built-in rubber nose pads, so adhesive pads won't hold on them. Check your specific model's nose bridge first — if it already has visible pads, these aren't needed.

How many pairs are in each pack?
Six pairs in the color and thickness you select.

Can I reuse the pads?
Adhesive pads are single-use. Replace when grip weakens or pads collect skin oils.

Do they work on sunglasses?
Yes — most everyday prescription and sunglasses frames.

0.5 mm or 1 mm for sliding glasses?
Try 1 mm Black first for more lift; use 0.5 mm if you only need a small adjustment.

Back to SIGONNA Eyeglass Nose Pads